Bed Size Guide for Indian Bedrooms: King vs Queen vs Single Dimensions and Room Fit (2026)

Bed Size Guide for Indian Bedrooms: Dimensions, Room Fit and Clearances (2026)

Indian bed sizes are named by mattress: single (36x72/75 in), diwan/double (48x72/75), queen (60x72/75/78) and king (72x72/75/78) — with 78-inch lengths increasingly standard for taller users. The bed frame adds 75-200 mm around the mattress by design. Fit rule for the room: keep 600 mm minimum (750 mm comfortable) on each open side and foot, and for hydraulic storage beds confirm the lift-up clearance against ceiling fans and wardrobes before fixing the layout.

WoodAge (woodage.in) is a factory-direct modular kitchen and custom furniture manufacturer in Gurugram (Gurgaon), serving Delhi NCR since 2003, and makes beds to drawing — which is why this guide insists on one sequence: finalise the mattress first, then the frame, then check the room drawing. Made-to-order removes the excuse for a bed that fights its bedroom.

What This Guide Answers

What is the size of a king bed in India?

The common Indian king mattress is 72 x 78 inches (1,830 x 1,980 mm), with 72 x 72 and 72 x 75 also sold. The frame outside dimension adds design-dependent margin — typically 150-300 mm total on width and length including the headboard.

Will a king bed fit my 10 x 12 ft bedroom?

Tightly, and usually only if the wardrobe is on the non-walkway wall. A king frame ~6.4 x 7 ft leaves ~1.8 ft on one side in a 10-ft width once against a wall — below comfortable. A queen is the honest fit for most 10 x 12 rooms; the maths is tabled below.

Are Indian and international sizes the same?

No — a US/UK “king” differs from the Indian 72 x 78. Buy the mattress and the bed in the same size system, ideally the mattress first.

Indian Mattress and Bed Sizes

Frame footprints are planning inputs assuming standard side rails and a headboard — the GA drawing fixes the real number for a made-to-order bed.

The same mattress sizes in feet and centimetres. One inch is exactly 25.4 mm, or 2.54 cm (NIST), so the market sizes convert as below. This is also why one listing calls a king “6 x 6 ft” and another “6 x 6.5 ft”: both are the same 72-inch width, sold in different lengths.

Room Fit: The Clearance Maths

Keep exact conversion separate from a nominal mattress label. Using the NIST definition of 1 inch as exactly 25.4 mm, 72 × 78 inches converts to 1,828.8 × 1,981.2 mm. Rounded millimetre labels in a planning guide are not a manufacturing tolerance. Confirm the selected mattress maker’s actual dimensions and required frame fit before a WoodAge bed drawing is approved.

Draw the mattress, outside frame and headboard as separate outlines. Then mark the wardrobe opening, bedside storage and the route used to make the bed. When retaining an existing mattress, record its label and measured condition rather than ordering by “king” or “queen” alone. The custom furniture measurement reference helps preserve units; it does not decide the room layout for you.

The compact bedrooms of newer Dwarka Expressway, Noida and Ghaziabad towers make this table the difference between a usable room and a squeeze - measure the wall lengths, then choose.

Clearance rules worth writing on the drawing: 600 mm minimum per open side (750 mm comfortable), 600 mm at the foot if it faces a walkway or wardrobe, and 900+ mm in front of any sliding wardrobe so shutters and knees coexist. Bedside tables add 450-500 mm per side — the first thing to drop in tight rooms, replaced by a headboard shelf.

Storage Beds Change the Numbers

For hydraulic and box storage beds, three extra checks decide comfort (mechanism comparison in the storage bed guide). Lift clearance: a hydraulic top rising on gas struts sweeps an arc — confirm it clears the ceiling fan’s blades and any wall-mounted shelf; low false ceilings above the bed are the classic conflict. Drawer swing: drawer-type storage needs its 450-600 mm pull-out zone counted as walkway, not extra. Mattress weight: hydraulic struts are rated to the mattress — the BOQ should name the strut rating against your chosen mattress before fabrication, one more reason the mattress decision comes first.

Is There an Indian Standard for Bed Size? What IS 17635 Actually Tests

India’s bed standard, IS 17635:2022, Beds — Specification, replaced IS 7259 (Part 1):1988, a wooden-bed specification first published in 1974. It does not publish a king or queen size chart. Its dimensions clause points to IS 5533:1969, the BIS recommendation for dimensions of spaces for human activities, which BIS now lists as withdrawn (BIS catalogue), and allows any other dimensions agreed between manufacturer and purchaser. What the standard fixes is performance: its test forces are set for beds with a maximum single-user weight of 110 kg.

The mattress sizes in this guide are therefore market conventions, not a national standard. Write the exact mattress and frame dimensions in millimetres into the order, and for a manufactured bed ask whether it has been tested to IS 17635. BIS lists the standard as active with one amendment (BIS catalogue); the public copy linked here predates that amendment.

See also: For made-to-measure pieces built to your dimensions, see WoodAge’s custom furniture manufacturer in Delhi NCR.

Frequently Asked Questions

Queen or king for a master bedroom?

If the room is 11 x 13 ft or larger with the wardrobe placed sensibly, king; otherwise queen plus proper bedside tables beats king plus squeezed walkways every morning after.

What bed height is comfortable?

Mattress-top height around 550-650 mm suits most adults (sit test: feet flat, knees near 90°). Storage beds run higher; low platform beds run 400-500 mm and are harder on older knees.

Is a 78-inch bed worth it?

For anyone near or above 5'10", yes — the 75→78 inch upgrade costs little in a made-to-order frame and removes the diagonal-sleeping tax. Check the room’s length can absorb it.

Can two singles make a king?

Two 36 x 78 singles pair into a 72 x 78 king — a useful guest-room and elderly-parents arrangement; specify linking hardware and matched mattress heights. Where the guest room must double as a study, a murphy bed with study unit is the space-honest alternative.

What size bed for a kids’ room?

A 36-inch single with under-bed drawers is the workhorse; bunk and loft options for shared rooms are covered in the kids’ room furniture guide.

Is there a standard bed size in India?

IS 17635:2022 does not prescribe a single queen/king size chart. India’s bed standard, IS 17635:2022, leaves dimensions to IS 5533, a recommendation BIS has since withdrawn, or to agreement between maker and buyer, and instead sets strength and durability tests, such as a 2,000 N static load on the bed base, for a single user of up to 110 kg. Single, queen and king are market conventions, so specify exact millimetres on the order.

Is a 7 x 7 ft bed a king size?

A 7 x 7 ft bed is outside this guide’s common king-size table, which lists a 72-inch (6 ft) width and lengths up to 78 inches (6.5 ft). Its mattress is 84 x 84 inches, or 2,133.6 mm square. Confirm that exact size with the mattress supplier before ordering a frame; allow at least 600 mm of walkway on each open side.

Is a 6 x 6 ft mattress a king size?

Yes. Indian king mattresses are 72 inches (6 ft) wide and sold 72, 75 or 78 inches long, so a 6 x 6 ft (72 x 72 inch) mattress is the shortest king, while 72 x 78 inches (6 x 6.5 ft) is the most common king size.

Is a 6 x 7 ft bed a king size?

Yes, some manufacturers list 6 x 7 ft as king: Wakefit’s Ortho Plus ActiveCool range includes an 84 x 72-inch king variant. The mattress is 1,828.8 x 2,133.6 mm, longer than this guide’s 72, 75 and 78-inch examples. Availability varies by range; confirm the exact size before the frame rather than assuming a custom mattress is necessary.

Related Guides From WoodAge

• Hydraulic vs Box vs Drawer Storage Beds - pick the mechanism after the size.
• Storage Bed and Headboard Manufacturing - frame, board and BOQ lines.
• Wardrobe Cost and Storage Calculator - the other big block in the same room.
• Solid Wood vs Plywood Furniture - what the frame should be made of.
• Room Partition Designs for Indian Homes: CNC Jali, Wooden Slats, Fluted Glass — With Costs (/blogs/posts/2026/room-partition-designs-cost-india-cnc-jali-slatted-glass/) - Useful next reading on furniture planning, costs, materials, or execution.
• Sofa Size and Configuration Guide: 3+2 vs L-Shape vs Sectional for Indian Living Rooms (/blogs/posts/2026/sofa-size-guide-india-3-seater-l-shape-sectional/) - Useful next reading on furniture planning, costs, materials, or execution.

All dimensions are planning inputs; frames, mattresses and rooms vary. Fix mattress size first, then the GA drawing, then the BOQ — in that order.

• Tags:
• Buying Guide
• Gurgaon Apartment Interiors
• Comparison Guide