[
      ![WoodAge - modular kitchen & custom furniture manufacturer in Gurgaon since 2003](/images/WGlogo.png)
    ](/)

Versioned public data release

# Cabinet Materials Standards Verification | WoodAge

This versioned WoodAge sheet helps a buyer check cabinet-board standards, dated BIS transition context and one exact manufacturer document. It records what each source proves, what it cannot prove, and the product, batch, licence, test, drawing or warranty evidence to request before a quote becomes a contract.

## What this release is

A 14-record bibliographic and decision sheet for cabinet materials and furniture-standard verification, with official source URLs, evidence grades, buyer checks and explicit non-inference boundaries.

**Version:** 1.0.0 · **Released:** 2026-08-21 · **Records:** 14

## Decision records

| ID | Source / edition | Decision scope | Buyer evidence | Boundary |
| --- | --- | --- | --- | --- |
| MAT-BIS-303-2024Grade A | IS 303:2024Plywood for General Purposes — Specification (Fourth Revision)Official source | Use this official bibliographic record to identify the current general-purpose plywood edition named in a quote or product document. | Ask for the exact board product name, declared grade, batch/invoice trail and any applicable BIS licence or test documentation; reconcile the document to the delivered board. | It does not prove that a quoted board, cabinet or supplier is certified, that a grade was supplied, or that an installed cabinet has a particular life. |
| MAT-BIS-710-2024Grade A | IS 710:2024Marine Plywood — Specification (Third Revision)Official source | Use this official record when a wet-zone or marine-plywood specification is being compared against the named IS 710 edition. | Request the exact product/grade, current licence or test evidence where applicable, invoice/batch trace and a BOQ location showing where the board is used. | It does not prove that any generic BWP label, board, cabinet or supplier conforms, nor that a completed cabinet is leak-proof or maintenance-free. |
| MAT-BIS-303-IMPLEMENTATION-2024Grade A | IS 303:2024 implementation contextImplementation guidelines for revised IS 303:2024Official source | Use this circular as a dated transition check when a supplier cites an older IS 303 edition or a quote needs an edition-change note. | Ask the supplier to identify the edition on the product evidence and explain any transition basis; retain the dated document with the quotation review. | It does not prove that a specific board is licensed, tested, delivered, or suitable for a particular moisture zone. |
| MAT-BIS-710-IMPLEMENTATION-2024Grade A | IS 710:2024 implementation contextImplementation guidelines for revised IS 710:2024Official source | Use this circular to check the dated implementation context when a wet-zone quotation names IS 710:2024. | Request the exact board grade, supplier documentation, batch/invoice evidence and a drawing/BOQ showing wet-zone use and edge-sealing responsibility. | It does not prove a quoted panel is certified, that a wet zone has been detailed correctly, or that installed furniture will resist every leak or exposure. |
| MAT-BIS-12823-2025Grade A | IS 12823:2025Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)Official source | Use this record when a prelaminated particle-board specification is named and the quote must identify the applicable standard edition rather than rely on a trade adjective. | Request the board manufacturer's exact product/grade, current test or licence evidence where applicable, batch/invoice details and edge/face exposure specification. | It does not map every product sold as HDHMR to IS 12823, prove certification, or establish performance of a finished cabinet in a particular room. |
| MAT-BIS-12406-2025Grade A | IS 12406:2025Medium Density Fibre Boards for General Purpose — Specification (Third Revision)Official source | Use this record when MDF is proposed for a cabinet component and the buyer needs the current standard edition and classification context. | Ask for exact manufacturer/product name, grade/class, emissions or test evidence as applicable, invoice/batch trace and the component's exposure/edge-sealing plan. | It does not prove that an MDF board is certified, that a supplier's grade claim is correct, or that a finished component is suitable for a wet zone. |
| MAT-BIS-3087-2005-REVIEWGrade A | IS 3087:2005 legacy review recordPracticle boards of wood and other lingnocellulosic materials (medium density) for general purposes -SpecificationOfficial source | Use this record only to interpret an older quotation or certificate that names IS 3087:2005; check the newer IS 3087:2025 transition record before accepting it as current. | Ask why the older edition is cited, then check the current IS 3087:2025 laboratory-scope record and BIS product-specific certification/QCO guidance before accepting a licence or product claim: https://lims.bis.gov.in/home_lab_scope/699/ and https://www.bis.gov.in/product-certification/product-specific-guidelines/?lang=en | It does not establish that IS 3087:2005 is the current applicable edition in every transaction, nor that any board or supplier is certified. |
| MAT-BIS-BOARD-TRANSITION-2026Grade A | IS 12406:2025, IS 12823:2025, IS 3087:2025 and IS 14587:2025 transition contextExtension for implementation of revised wood-based board standardsOfficial source | Use this dated transition check when a quote or legacy document cites one of the revised board standards near the implementation boundary. | Request the exact edition on the supplier document, current licence/test evidence where applicable, product label/batch trail and a written explanation for any older reference. | It does not prove that a particular product has been licensed, tested, delivered, or certified after that date, and it does not make a trade label equivalent to a standard. |
| MAT-BIS-17631-2022Grade A | IS 17631:2022Work Chairs — SpecificationOfficial source | Use this furniture-standard reference when an office-chair quotation needs a named standard scope and the exact chair product is being verified. | Request the exact chair model, manufacturer documentation, applicable test/licence evidence and a written schedule of warranty, load and adjustment features. | It does not prove that a chair, workstation supplier or delivered office is certified or that the chair meets every ergonomic/site requirement. |
| MAT-BIS-17633-2022Grade A | IS 17633:2022Tables and Desks — SpecificationOfficial source | Use this reference when a desk, boardroom table or office-table quotation needs a named furniture-standard scope. | Request the exact model/drawing, board/edge specification, load and stability evidence, cable/accessory schedule and applicable product documentation. | It does not prove the structural capacity, dimensions, finish, cable route or conformity of a particular desk/table or installation. |
| MAT-BIS-17634-2022Grade A | IS 17634:2022Storage Units — SpecificationOfficial source | Use this furniture-standard reference for wardrobes, office storage and other storage-unit quotations where the product scope needs a standards cross-check. | Request the model/drawing, load and anchoring details, hardware schedule, material evidence, delivery inspection method and applicable licence/test documents. | It does not prove the load, anchoring, anti-tip, board grade, hardware or certification status of a specific storage unit. |
| MAT-BIS-17637-2021Grade A | IS 17637:2021Performance Requirements of Surface Finishes for Furniture ApplicationsOfficial source | Use this reference to ask what surface-finish performance evidence applies to a furniture finish; do not treat it as a finish-life promise. | Request the exact finish/product document, test report or licence evidence where applicable, care instructions and the written warranty/repair boundary. | It does not prove that a selected laminate, paint, veneer or installed panel passes the standard, nor convert laboratory performance into calendar life. |
| MAT-BIS-KNOW-YOUR-STANDARDGrade A | BIS standard and licence verification routeKnow Your StandardOfficial source | Use this portal as a buyer's starting point to locate standard documents, amendments, licence and laboratory information before accepting a material claim. | Search the exact IS number/product and ask the supplier for a current licence or test record that matches the manufacturer, product, grade and batch. | A portal search or a seller's screenshot does not prove that the quoted product is licensed, genuine, current or installed correctly. |
| MAT-HETTICH-SENSYS-9135511Grade B | Hettich Sensys concealed hinge referenceSensys product data sheet (9135511)Official source | Use this exact Hettich document only when a quotation names the matching Sensys family/SKU and the buyer wants to check the manufacturer's cycle-test reference. | Request the exact article/SKU, carton/invoice trail, quantity, mounting-plate compatibility, installation/adjustment guidance and warranty route; photograph the delivered hardware. | It does not prove that an unnamed hinge is Sensys, that the quoted SKU was installed, or that 80,000 cycles equal calendar life or a whole-kitchen warranty. |

## Method and source boundary

# Cabinet Materials and Standards Verification — methodology

Version 1.0.0; release 2026-08-21; reviewed 2026-08-21.

Bibliographic and decision records compiled from current official BIS pages/documents and one exact manufacturer product data sheet. The release paraphrases titles and evidence boundaries; it does not redistribute standards text, certify products, rank brands or convert tests into installed life.

The records are a bibliographic/decision sheet. Official BIS pages and documents are used for standard titles, revisions, implementation or review context and verification routes. The Hettich record is included only for the exact product document and its bounded cycle-test reference. No standard clauses are reproduced. No board or product is called certified without exact evidence. Laboratory or cycle results are not converted into installed life, and brands are not ranked.

For procurement, name the exact material/product, grade, batch or invoice trail, applicable licence/test document, measured location, edge/exposure responsibility and warranty route in the BOQ.

Each source is linked adjacent to the decision it supports. A source can prove only the scope stated in its row; it does not prove an unnamed product, certification, installed life, customer outcome or universal rule.

## Interpretation notes
MAT-BIS-303-2024 — IS 303:2024Source provesBIS identifies IS 303:2024 and its title/revision; it is a source to check the applicable standard edition.Does not proveIt does not prove that a quoted board, cabinet or supplier is certified, that a grade was supplied, or that an installed cabinet has a particular life.LimitationsA standard landing page is bibliographic evidence, not a licence, certificate, lab report or installed-performance guarantee.
MAT-BIS-710-2024 — IS 710:2024Source provesBIS identifies IS 710:2024 and its title/revision as the relevant marine-plywood specification record.Does not proveIt does not prove that any generic BWP label, board, cabinet or supplier conforms, nor that a completed cabinet is leak-proof or maintenance-free.LimitationsThe landing page does not establish product conformity or protect a cabinet from plumbing leaks, unsealed edges or poor installation.
MAT-BIS-303-IMPLEMENTATION-2024 — IS 303:2024 implementation contextSource provesThe official circular provides BIS implementation guidance for the revised IS 303:2024 edition.Does not proveIt does not prove that a specific board is licensed, tested, delivered, or suitable for a particular moisture zone.LimitationsThis public implementation circular is not the licensed standard and cannot substitute for product-specific conformity evidence.
MAT-BIS-710-IMPLEMENTATION-2024 — IS 710:2024 implementation contextSource provesThe official circular provides BIS implementation guidance for the revised IS 710:2024 edition.Does not proveIt does not prove a quoted panel is certified, that a wet zone has been detailed correctly, or that installed furniture will resist every leak or exposure.LimitationsThe circular supports edition and transition facts only; it does not promise installed cabinet life or make an installation leak-proof.
MAT-BIS-12823-2025 — IS 12823:2025Source provesBIS identifies the 2025 standard title/revision; its public laboratory context lists board classifications such as REG, MR and HMR for testing scope.Does not proveIt does not map every product sold as HDHMR to IS 12823, prove certification, or establish performance of a finished cabinet in a particular room.LimitationsA board label is not a standard claim. The exact product document and current BIS records control; this release does not redistribute standard text.
MAT-BIS-12406-2025 — IS 12406:2025Source provesBIS laboratory scope identifies IS 12406:2025 and records Grade 1/Grade 2 and E1/E2 classification fields in its testing context.Does not proveIt does not prove that an MDF board is certified, that a supplier's grade claim is correct, or that a finished component is suitable for a wet zone.LimitationsThe laboratory-scope page is not a product licence or installation specification; exposure, sealing, ventilation and plumbing remain design decisions.
MAT-BIS-3087-2005-REVIEW — IS 3087:2005 legacy review recordSource provesThe BIS review detail records the 2005 edition, 2020 review, revision/amendment counts and voluntary-certification status shown on that page.Does not proveIt does not establish that IS 3087:2005 is the current applicable edition in every transaction, nor that any board or supplier is certified.LimitationsThis is a legacy review record. Current IS 3087:2025 and any product-specific certification/QCO applicability must be checked separately; no standard text is reproduced here.
MAT-BIS-BOARD-TRANSITION-2026 — IS 12406:2025, IS 12823:2025, IS 3087:2025 and IS 14587:2025 transition contextSource provesThe BIS circular names the revised standards and states the implementation-date extension to 09 August 2026.Does not proveIt does not prove that a particular product has been licensed, tested, delivered, or certified after that date, and it does not make a trade label equivalent to a standard.LimitationsThis is a dated implementation boundary, not a blanket conformity decision. Recheck the current BIS record and exact product evidence for a live procurement.
MAT-BIS-17631-2022 — IS 17631:2022Source provesBIS's CED 35 program document lists IS 17631:2022 as a furniture standard for work chairs.Does not proveIt does not prove that a chair, workstation supplier or delivered office is certified or that the chair meets every ergonomic/site requirement.LimitationsThe program document is a standards-listing source, not a test report, licence, ergonomic assessment or supplier approval.
MAT-BIS-17633-2022 — IS 17633:2022Source provesBIS's CED 35 program document lists IS 17633:2022 for tables and desks.Does not proveIt does not prove the structural capacity, dimensions, finish, cable route or conformity of a particular desk/table or installation.LimitationsThe CED 35 listing does not certify a custom table or replace the approved drawing, structural check and exact product evidence.
MAT-BIS-17634-2022 — IS 17634:2022Source provesBIS's CED 35 program document lists IS 17634:2022 for storage units.Does not proveIt does not prove the load, anchoring, anti-tip, board grade, hardware or certification status of a specific storage unit.LimitationsThis release uses the CED 35 listing as a scope pointer only; it is not a storage-unit test report or a universal installation prescription.
MAT-BIS-17637-2021 — IS 17637:2021Source provesBIS's CED 35 program document lists IS 17637:2021 as a furniture surface-finish standard.Does not proveIt does not prove that a selected laminate, paint, veneer or installed panel passes the standard, nor convert laboratory performance into calendar life.LimitationsThe program document names the standard only. It is not evidence that a finish product or furniture installation passed any test.
MAT-BIS-KNOW-YOUR-STANDARD — BIS standard and licence verification routeSource provesBIS describes the portal as a route to standards, amendments, notifications, scheme/testing and related official information.Does not proveA portal search or a seller's screenshot does not prove that the quoted product is licensed, genuine, current or installed correctly.LimitationsThis is a verification route, not a product certificate. The buyer still has to match the exact product and current record.
MAT-HETTICH-SENSYS-9135511 — Hettich Sensys concealed hinge referenceSource provesThe Hettich product data sheet gives an 80,000-opening-cycle reference for the documented Sensys product family/SKU context.Does not proveIt does not prove that an unnamed hinge is Sensys, that the quoted SKU was installed, or that 80,000 cycles equal calendar life or a whole-kitchen warranty.LimitationsA laboratory/product cycle reference is not installed life. Door weight, alignment, use, humidity, cleaning and service affect outcome; no brands are ranked.

## Sources and review dates

- **SRC-BIS-IS303-2024-PAGE** — [IS 303 : 2024](https://www.bis.gov.in/is-303-2024/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-IS710-2024-PAGE** — [IS 710 : 2024](https://www.bis.gov.in/is-710-2024/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-IS12823-2025-PAGE** — [IS 12823 : 2025](https://www.bis.gov.in/is-12823-2025/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-LIMS-IS12406-2025** — [IS 12406:2025 laboratory scope](https://lims.bis.gov.in/home_lab_scope/1624/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-IS3087-2005-REVIEW** — [IS 3087:2005 standard review detail](https://services.bis.gov.in/php/BIS_2.0/bisconnect/standard_review/Standard_review/Isdetails?ID=OTY2MA%3D%3D), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-LIMS-IS3087-2025** — [IS 3087:2025 laboratory scope](https://lims.bis.gov.in/home_lab_scope/699/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-PRODUCT-GUIDELINES** — [Product-specific guidelines](https://www.bis.gov.in/product-certification/product-specific-guidelines/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-BOARD-TRANSITION-2026** — [Extension for implementation of revised wood-based board standards](https://services.bis.gov.in/tmp/Circular_vuKb_2026-02-18.pdf), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-CED35-FURNITURE** — [CED 35 Furniture Program of Work](https://services.bis.gov.in/php/BIS_2.0/bisconnect/pow_new/Pow/download_pow_pdf_dept_commtt/63/206/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-BIS-KNOW-YOUR-STANDARD** — [Know Your Standard](https://www.bis.gov.in/know-your-standard/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **SRC-HETTICH-SENSYS-9135511** — [Sensys product data sheet (9135511)](https://selektor.hettich.com/fileadmin/DIY_Selektor/datenblaetter/en/9135511_en.pdf), Hettich. Grade B; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-303-2024** — [Plywood for General Purposes — Specification (Fourth Revision)](https://www.bis.gov.in/is-303-2024/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-710-2024** — [Marine Plywood — Specification (Third Revision)](https://www.bis.gov.in/is-710-2024/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-303-IMPLEMENTATION-2024** — [Implementation guidelines for revised IS 303:2024](https://www.services.bis.gov.in/tmp/Circular_lPrU_2024-07-03.pdf), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-710-IMPLEMENTATION-2024** — [Implementation guidelines for revised IS 710:2024](https://www.services.bis.gov.in/tmp/710_-_Revised_IS_Imp_Guidelines_8xXd_2024-07-04.pdf), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-12823-2025** — [Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)](https://www.bis.gov.in/is-12823-2025/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-12406-2025** — [Medium Density Fibre Boards for General Purpose — Specification (Third Revision)](https://lims.bis.gov.in/home_lab_scope/1624/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-3087-2005-REVIEW** — [Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification](https://services.bis.gov.in/php/BIS_2.0/bisconnect/standard_review/Standard_review/Isdetails?ID=OTY2MA%3D%3D), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-BOARD-TRANSITION-2026** — [Extension for implementation of revised wood-based board standards](https://services.bis.gov.in/tmp/Circular_vuKb_2026-02-18.pdf), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-17631-2022** — [Work Chairs — Specification](https://services.bis.gov.in/php/BIS_2.0/bisconnect/pow_new/Pow/download_pow_pdf_dept_commtt/63/206/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-17633-2022** — [Tables and Desks — Specification](https://services.bis.gov.in/php/BIS_2.0/bisconnect/pow_new/Pow/download_pow_pdf_dept_commtt/63/206/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-17634-2022** — [Storage Units — Specification](https://services.bis.gov.in/php/BIS_2.0/bisconnect/pow_new/Pow/download_pow_pdf_dept_commtt/63/206/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-17637-2021** — [Performance Requirements of Surface Finishes for Furniture Applications](https://services.bis.gov.in/php/BIS_2.0/bisconnect/pow_new/Pow/download_pow_pdf_dept_commtt/63/206/), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-BIS-KNOW-YOUR-STANDARD** — [Know Your Standard](https://www.bis.gov.in/know-your-standard/?lang=en), Bureau of Indian Standards. Grade A; accessed 2026-08-21; reviewed 2026-08-21.

- **MAT-HETTICH-SENSYS-9135511** — [Sensys product data sheet (9135511)](https://selektor.hettich.com/fileadmin/DIY_Selektor/datenblaetter/en/9135511_en.pdf), Hettich. Grade B; accessed 2026-08-21; reviewed 2026-08-21.

## Download the immutable release

Files below are generated from the editorial source records and checked by the release checksum file.

- [CSV](/data/releases/cabinet-materials-standards-verification/1.0.0/cabinet-materials-standards-verification-v1.0.0.csv)

- [JSON](/data/releases/cabinet-materials-standards-verification/1.0.0/cabinet-materials-standards-verification-v1.0.0.json)

- [JSON Schema](/data/releases/cabinet-materials-standards-verification/1.0.0/cabinet-materials-standards-verification-v1.0.0.schema.json)

- [Data dictionary](/data/releases/cabinet-materials-standards-verification/1.0.0/data-dictionary.md)

- [Methodology](/data/releases/cabinet-materials-standards-verification/1.0.0/methodology.md)

- [Changelog](/data/releases/cabinet-materials-standards-verification/1.0.0/changelog.md)

- [SHA-256 checksums](/data/releases/cabinet-materials-standards-verification/1.0.0/checksums.txt)

## Limitations

- A standard title, implementation circular or laboratory-scope entry is not proof that a particular board, product, supplier or cabinet is certified.

- A product or cycle document applies only to the exact documented product context; it is not a whole-installation warranty or calendar-life forecast.

- The buyer must request current product, batch, licence/test, drawing and warranty evidence and reconfirm exposure and installation responsibility.

- The release is a dated verification aid, not legal advice, engineering design or a replacement for licensed standards text.

**Publisher:** WoodAge, Gurugram-based since 2003.

**Dataset version:** 1.0.0. **Last source review:** 2026-08-21.

Source review and release generation do not replace buyer, contract or technical approval.

    ×

Factory-Direct Consultation

## Get a Transparent BOQ Quote

Share your requirement and the WoodAge team will respond with the right next step. Every estimate is confirmed only after a site measurement and a written BOQ.

      Name *

      Email *

      Phone Number *

      What do you need? *

      Request Quote

We use these details only to respond to your enquiry. No spam.