WoodAge operates a factory-direct manufacturing facility at 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002, since 2003. Machinery: panel saw, CNC router, automatic edge banding, multi-boring station, pressure press, and 3D printer. The 8-stage production process runs from material receiving through dispatch. Factory visits can be arranged Wednesday to Monday, 9 AM to 9 PM IST; call ahead to confirm. An 8-point buyer inspection checklist is on this page.
The factory tour page is an inspection guide. These visuals show the machine, edge, and quality-control details a buyer should notice.
The visual references below include illustrative material and process examples; they are not presented as photographs of a completed WoodAge project.
| Field | Detail |
|---|---|
| Address | 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002, Haryana |
| Geo coordinates | 28.475976 °N, 77.082556 °E (verifiable on Google Maps) |
| Operating hours | Wednesday-Monday, 09:00-21:00 IST. Tuesday closed. |
| Walk-in policy | Welcome during operating hours. Heads-up call appreciated to confirm active production hours. |
| Year of operation | Operating since 2003 |
| Phone | +91-9910318044 |
Bring a short record sheet so observations can be compared with the kitchen, wardrobe or furniture BOQ later:
For board terminology, use the current BIS IS 303:2024 and BIS IS 710:2024 references, then verify the actual product document. A tour is an observation opportunity, not proof of capacity, warranty or future project performance.
| Machine | Function | Why it matters |
|---|---|---|
| Panel saw | Precision cutting of plywood / HDHMR panels to dimension per GA drawing | Clean square cuts vs hand-saw uneven cuts; foundation of dimensional accuracy |
| CNC router | Computer-controlled routing for custom profiles, mortise-tenon joinery, decorative patterns | Ask how the current setup is checked against the GA drawing and the project's tolerances. |
| Automatic edge banding machine | Hot-melt adhesive applied to panel edges under pressure | Inspect the bond and confirm the selected edge material, adhesive and site-use requirements in the BOQ. |
| Multi-boring station | Drills hardware holes (hinge cup, drawer slide screws, shelf-pin holes) in one operation | Consistent positioning; soft-close mechanism alignment depends on this precision |
| Pressure press | Bonds laminate to the selected panel under pressure | Ask to inspect a finished sample and confirm the specified laminate and panel substrate. |
| 3D printer | Prints custom jigs, fittings, hardware prototypes and design mock-ups | Faster bespoke fittings and design validation before production |
| Dust extraction system | Captures sawdust at cutting / sanding stations | Quality + worker safety; clean factory floor signal |
| QC dry-fit station | Pre-assembled carcass checked before dispatch | Provides an opportunity to review fitment before dispatch; ask what is recorded in the project QC check. |
| Material storage | BWP IS:710 plywood, HDHMR, laminates, hardware boxes (Hettich / Häfele / Blum) stocked on floor | Material proof - branded boxes vs marketing brochures |
To watch each of these machines running on the floor, book a factory visit.
On a factory visit, ask to see each of these. WoodAge welcomes the check.
The criteria below turn a factory visit into a buyer-verifiable conversation. WoodAge has operated from Gurugram since 2003; ask for the parts of the process that apply to your project:
See factory-direct definition for the full 7-point verification framework.
Marketing labels such as factory-direct are easiest to evaluate through checks a buyer can perform. At 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002, a visit can help you compare the visible address, material labels, equipment and stated process with the written BOQ. Ask what is observable on the day; a visit does not prove a lifespan, capacity, warranty or installation outcome.
Rather than present stock photos as proof of a particular project, this page describes the machinery and process for inspection. To see the floor for yourself and ask about the panel saw, edge bander, multi-boring station or CNC router, book a factory visit. Call ahead during Wednesday-to-Monday operating hours and ask which stations or samples can be observed that day.
Use the questions below when comparing a factory visit with a quote: what equipment and material labels can be observed, which steps happen at the facility, how panels are checked, and how access, installation and warranty responsibilities are recorded. The page names the panel saw, CNC router, automatic edge banding, multi-boring station, pressure press, 3D printer and BWP IS:710 checks without treating a visible machine as proof of a future outcome.
| Buyer question | Useful answer on this page |
|---|---|
| modular kitchen factory tour Gurgaon | Use the tour to observe available machinery, material labels, panel workflow and the dispatch questions relevant to your BOQ. |
| what to inspect in a furniture factory | Ask about board grade, edge banding, boring checks, hardware lines, finish samples and project labelling. |
| factory direct verification | Ask who is responsible for measurement, drawings, manufacturing, dispatch, installation and service, and record it in the BOQ. |
| BWP IS:710 check | Ask to see the grade stamp on a sheet intended for kitchen wet zones. |
| hardware verification | Ask how Hettich, Hafele, Blum or other hardware lines are written into the BOQ. |
| factory tour before advance | Use the visit before paying a large advance, especially for kitchens, wardrobes or packages, and obtain the written scope first. |
Buyers considering projects around Dwarka Expressway, Golf Course Road or other Delhi NCR locations can use the same questions before finalising a local project. Bring the quote, floor plan and relevant site photos so the observations can be compared with the BOQ.
Depending on the day's production schedule, a tour may let you see the panel saw, automatic edge-banding machine, multi-boring station, CNC router, pressure press and 3D printer, plus the staging area used before dispatch. Ask to see the IS:710 mark on a BWP sheet and inspect an edge-banding bond on a cut panel. A visit lets you observe the equipment and ask which steps are completed at this facility; it does not by itself establish installed performance or project scope. The address is 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram.
Ask to see the IS:710 mark on a BWP sheet, inspect an edge-banding bond on a cut panel, and ask how carcass and shutters are finished and labelled for your project before dispatch. Record which steps happen at this facility and which responsibilities are named in the written BOQ. Material, adhesive, installation and site conditions all affect performance.
You can ask to see BWP plywood, HDHMR, laminate, acrylic, veneer and PU finish samples, and ask how the selected material or finish is processed on the CNC router, edge bander or pressure press. Confirm the exact grade, finish and product line in your BOQ; a sample is not a guarantee of installed performance.
Call or WhatsApp +91-9910318044 to arrange a tour. WoodAge runs Wednesday to Monday, 09:00 to 21:00 IST and is closed Tuesday, at 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram. Booking ahead lets you ask which stations or samples can be observed that day.
WoodAge, Saraswati Vihar, Gurugram - factory-direct manufacturer since 2003.
Not affiliated with woodagesofacumbed.com.
- by WoodAge.
Factory-Direct Consultation
Share your requirement and the WoodAge team will respond with the right next step. Every estimate is confirmed only after a site measurement and a written BOQ.