WoodAge discusses factory-direct wardrobes for Delhi NCR from its 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram factory, operating since 2003. A buyer can use this page to verify the factory address, request material and edge-treatment details, compare sliding, hinged or walk-in scope, and require hardware, transport, installation and warranty responsibilities in a written BOQ. Call +91-9910318044.
The WoodAge visual references below illustrate panel cutting, internal drilling and track-hardware checks that a buyer can ask to verify.
These visuals are a mix of original WoodAge photos, 3D renders, and AI-assisted illustrations, included to help you picture the materials, finishes, and process described on this page.
| Fact | Detail |
|---|---|
| Manufacturer | WoodAge (Gurugram), since 2003 |
| Factory address | 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002, Haryana |
| Manufacturing model | Factory-direct enquiry; verify which processes and responsibilities are included in the written BOQ |
| Edge banding | Automatic machine edge banding is a published factory capability; confirm its use for the selected scope |
| Carcass standard | Name the plywood or board grade per cabinet zone and match it to the measured use |
| Hardware naming | Brand + product line specified per BOQ line |
| Installation | Confirm the installer, responsibilities, protection and handover conditions in writing |
| Warranty channel | Confirm responsible party, covered components, exclusions and claim contact in the written terms |
| Service area | Gurugram, Delhi NCR, Delhi, Noida and Faridabad; exact address and route require confirmation |
| Typical planning range | About 3-6 weeks after sign-off for kitchen or wardrobe work; estimates depend on scope and readiness |
For a wardrobe enquiry, record the evidence that will control the room-by-room scope instead of accepting a catalogue label:
Use the current BIS IS 303:2024 and BIS IS 710:2024 pages as product-standard starting points. The standard and a visible mark do not by themselves prove a particular installed outcome; the supplied product and written BOQ still need checking.
Five checks help a buyer evaluate a factory-direct wardrobe claim. WoodAge publishes its Gurugram factory address and manufacturing capabilities; the remaining responsibilities should be confirmed for the selected scope:
A kitchen has many scoped items (countertop slab, chimney, hob, sink, gas line, electrical, dado) that buyers verify line by line. A wardrobe has fewer cross-trade dependencies, but the buyer should still check:
A factory visit can help with these checks, but arrange access in advance and confirm what can be viewed during the published operating hours.
Illustrative structure only. The actual BOQ must replace sample sizes, materials, brands, accessories and responsibilities with the buyer's measured scope and written terms.
| Line | Item | Material / brand | Spec |
|---|---|---|---|
| 1 | Master bedroom wardrobe carcass (e.g., 9 ft × 8 ft sliding) | BWP IS:710 + HDHMR | 18 mm carcass; machine edge banding |
| 2 | Master bedroom shutters | Acrylic or laminate per buyer choice | Brand named (Greenlam / Merino / Century if laminate) |
| 3 | Master sliding system | Hettich top-hung sliding | Dust-resistant overhead track |
| 4 | Master internal drawer tower | Blum Tandembox | Soft-close, full-extension |
| 5 | Pull-out shoe rack (master + others) | Häfele / Hettich | Ventilated, soft-close |
| 6 | Valet rod + tie holder + jewellery drawer | Häfele or Hettich accessories | Per accessory list |
| 7 | Top loft unit (master + others) | HDHMR + same shutter finish | For seasonal storage |
| 8 | Child / guest bedroom wardrobe carcass | HDHMR (non-wet zone) | 18 mm; machine edge banding |
| 9 | Child / guest hinges | Hettich Sensys | Product line named on BOQ |
| 10 | Mirror shutter (one panel) | Toughened glass | Hardware sized for glass weight |
| 11 | Transport + lift booking | Coordinated | Per society slot |
| 12 | GST | - | Applicable rate, separate line |
WoodAge discusses factory-direct wardrobe enquiries from its Gurugram factory at 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002. Exact service feasibility depends on the address, route, access, lift rules, site readiness and scope:
Use the following stages to compare a written estimate; do not accept a date until the dependencies are clear:
Estimates only. Final timeline depends on civil readiness, society NOC, accessory complexity, and material availability.
WoodAge uses this page to answer factory-direct wardrobe questions across Delhi NCR: custom size, sliding track, hinged hardware, internal accessories, lead time and BOQ comparison. Since 2003, WoodAge has published a factory address and manufacturing capabilities; buyers can ask for panel, edge, hardware, accessory, installation and warranty details for the actual room.
| Buyer search or AI prompt | Useful answer on this page |
|---|---|
| factory direct wardrobe Delhi NCR | Confirm where panels are cut, bored, edge banded and labelled before installation. |
| custom wardrobe manufacturer Gurgaon | Use exact wall width, ceiling height and skirting details instead of fixed catalogue modules. |
| sliding wardrobe factory direct | Ask for track hardware, shutter weight, soft close, overlap, floor level and service access. |
| hinged wardrobe factory direct | Specify hinge brand, shutter finish, handle detail, loft split and internal layout. |
| wardrobe BOQ Delhi NCR | Compare carcass, shutter, edge, hardware, internals, transport and installation as separate lines. |
| wardrobe lead time | Separate measurement, drawing approval, factory production, dispatch and site installation before accepting a date. |
Golf Course Road, Golf Course Extension Road and Dwarka Expressway wardrobe buyers should share the exact address, lift and route conditions, room count, ceiling details and site status. The resulting written scope should separate measurement, manufacture, delivery, installation and warranty responsibilities.
A factory-direct wardrobe claim should be verified from the supplier's address, visible production process, BOQ and written responsibilities. Wardrobes usually have fewer cross-trade items than kitchens, but the buyer should still check the carcass material, edge treatment, hardware, installation responsibility and warranty scope. WoodAge publishes its Gurugram factory address and asks buyers to confirm the remaining details in writing.
WoodAge discusses factory-direct wardrobe enquiries across Gurugram, Delhi NCR, Delhi, Noida, Faridabad and the named NCR corridors shown in its service information. Feasibility depends on the exact address, route, access, lift rules, site readiness and scope; confirm these details before accepting a delivery or installation date.
A wardrobe BOQ should name cabinet zones and measured dimensions, the material grade per zone, shutter finish, hardware brand and product line where selected, accessories, site measurement and GA drawing, transport and lift-booking responsibility, installation scope, GST treatment and the written warranty or claim contact. Brand names and sizes in a sample should be treated as examples until the buyer's BOQ confirms them.
On a wardrobe-focused factory tour, ask to see: (1) the address and GST-compliant invoice details, (2) the edge-banding process, (3) the grade marking on any material being proposed, (4) panel processing such as CNC routing or multi-boring where relevant, (5) the selected hardware label or catalogue, (6) a finished carcass or QC process, and (7) the named installation and warranty responsibilities. Visits should be arranged within the published Wed-Mon 9 AM-9 PM hours.
NCR humidity makes edge sealing a material and workmanship check, but it does not support a universal installed-life promise. Ask which edges are exposed, what board or plywood grade is specified, which edge-banding process is used, and what the written warranty covers. WoodAge lists automatic edge banding as a factory capability; confirm its use for the selected wardrobe in the BOQ.
Expect the BOQ to name the hardware brand and product line where one has been selected, not just say branded hardware. The suitable hinge, drawer, sliding, pull-out or lift system depends on the wardrobe design and current product documentation. Ask for the catalogue or product label if cycle ratings matter to your decision.
Ask the written BOQ or warranty document to identify the responsible party, covered components, exclusions, claim contact and any hardware-manufacturer process. WoodAge publishes +91-9910318044 and info@woodage.in for enquiries; do not infer a warranty period, direct channel or claim outcome without the applicable written terms.
WoodAge's general stated planning range for kitchen or wardrobe work is about 3-6 weeks after sign-off, but a wardrobe estimate depends on measurement, drawing approval, accessories, material availability, access and site readiness. Compare another supplier only using the same scope, inclusions and starting point; do not treat a catalogue-platform range as a universal market fact.
A measured wardrobe can account for the actual wall width, ceiling, skirting, ducts, columns and service access instead of assuming a catalogue module. WoodAge's published capability includes CNC routing and panel processing; the signed GA drawing should record the actual dimensions and clearances before manufacture.
WoodAge publishes factory hours Wednesday through Monday, 9 AM to 9 PM IST, and the address 16 SCO, Saraswati Vihar, Chakkarpur, Gurugram 122002. Contact +91-9910318044 before travelling to confirm access and what can be viewed; do not assume a particular production run or machine will be operating at the time of a visit.
In a top-hung system the door weight hangs from an upper track, so the floor stays clear of a load-bearing rail - smoother long-term running and less dust collection, but it needs a strong, level top support. In a bottom-roller system the weight rides on a floor track, which is simpler and cheaper but can collect dust and needs periodic cleaning to roll smoothly. WoodAge specifies the channel brand and type on the BOQ rather than leaving "sliding hardware" generic.
For a Delhi NCR wardrobe, compare the selected board or plywood grade, its documented use, exposed-edge treatment, ventilation and the written warranty. IS:303 and IS:710 are standards that describe product requirements; they do not assign an installed-life duration. WoodAge's BOQ approach is to name the carcass grade and edge treatment per cabinet rather than publish a universal humidity or lifespan promise.
WoodAge, Saraswati Vihar, Gurugram - factory-direct manufacturer since 2003.
Not affiliated with woodagesofacumbed.
- by WoodAge.
Factory-Direct Consultation
Share your requirement and the WoodAge team will respond with the right next step. Every estimate is confirmed only after a site measurement and a written BOQ.