Factory Direct Interiors in Gurgaon: WoodAge Honest Turnkey Scope (Manufacture / Coordinate / Exclude)

WoodAge manufactures end-to-end at its Gurugram factory: modular kitchens (full carcass + shutters + hardware), wardrobes (sliding / hinged / walk-in), TV units and entertainment consoles, bathroom vanities, beds with storage, study tables, bedside tables, dining tables, wall paneling (decorative + acoustic), jali screens, and CNC-carved patterns. All of these are factory-cut, edge-banded, drilled, and finished at WoodAge - not subcontracted.

WoodAge coordinates (does not manufacture) the following through verified vendor partners: paint and surface finishing, false ceiling and POP work, electricals and lighting upgrades, plumbing and sanitaryware fitting, lighting fixture supply. WoodAge owns the schedule and quality check for these trades, but the underlying work is by partner specialists. Accountability is dual - WoodAge is the buyer-facing point of contact; the partner trade is liable for their specific scope. This honest separation lets the buyer know exactly which entity to call when an issue arises.

Typically excluded unless explicitly added with separate scope confirmation: civil masonry (load-bearing wall changes, structural alterations), flooring and tile installation, sanitaryware procurement, bathroom fittings (taps, showers, water heaters), AC installation, soft furnishings (sofas with full upholstery, curtains, rugs, mattresses), large appliances (refrigerators, washing machines, ACs), structural reinforcement. These are scoped to specialist trades because they're not factory-direct carpentry and need different vendor expertise.

Most "turnkey" interior pages claim to handle everything - but in practice the work spans 8 to 12 different specialist trades (civil, electrical, plumbing, HVAC, paint, false ceiling, carpentry, soft furnishings, lighting, sanitaryware, appliances, structural). Vendors who claim everything either subcontract aggressively (with margin layered on each layer) or do some trades poorly. WoodAge's honest separation tells the buyer exactly which trades are in-house factory-direct, which are coordinated through partners, and which need separate vendors - so the buyer knows where to set expectations and recourse.

NCR climate engineering means: BWP IS:710 plywood in wet zones (kitchen sink base, bathroom vanity, areas adjacent to bathrooms), machine edge banding on every cabinet edge (sealed against monsoon moisture), HDHMR for high screw-hold dimensional stability in bedroom and living-room furniture, termite-resistant treatment for buildings on landfill plots, and material choice per room exposure. WoodAge specifies these defaults per room during GA drawing review - they're not upcharges, they're standard.

Standard: laminate shutters, HDHMR carcass with BWP at wet zones, Hettich Sensys soft-close hinges, basic accessory set. Premium: acrylic shutters in kitchen, mix of laminate + acrylic in wardrobes, BWP IS:710 throughout wet zones, Blum Tandembox drawer systems, pantry pull-outs and lift mechanisms. Luxury: PU or lacquer glass shutters, premium veneer accents, Blum Tandembox + AVENTOS premium, designer hardware, integrated lighting. WoodAge presents the tier matrix during BOQ discussion so the buyer chooses against the actual cost-per-room implication.

Week 1: builder-handover paperwork + society NOC + site measurement. Week 2: GA drawings (kitchen + wardrobes + bedroom furniture). Week 3: BOQ + buyer sign-off + advance. Weeks 3-6: WoodAge factory manufacture in parallel + civil / electrical / plumbing partner work on-site if needed. Week 7: factory dispatch + WoodAge install (kitchen first, then wardrobes by room). Week 8: handover walkthrough + final paint touch-up. Estimates only - depends on site readiness, civil scope, and society logistics.

WoodAge coordinates (does not manufacture) false ceiling and lighting through verified partners. The schedule is integrated into the project timeline; quality check is by WoodAge; the underlying trade is by partner specialists. Lighting fixtures (the actual lamps, LED strips, pendants, chandeliers) are typically sourced separately - WoodAge designs the placement and switching layout but doesn't supply fixtures unless explicit scope addition.

Yes. The kitchen + wardrobe package (see /kitchen-wardrobe-package-gurgaon/) is a discrete WoodAge offering - full kitchen + every wardrobe + transparent BOQ + single install window. Turnkey interiors is the wider scope adding TV units, beds, vanities, paint coordination, false ceiling coordination, etc. Many Gurgaon buyers start with kitchen + wardrobes and add other carpentry later - both modes are supported.

Single contract (WoodAge as turnkey project manager): one point of contact, integrated schedule, WoodAge accountability for partner work, simpler invoicing. Multi-vendor: separate contracts with carpenter, painter, electrician, plumber - owner manages schedule and quality. Single-contract works for new-possession owners with limited time + project-management bandwidth. Multi-vendor works for owners with strong DIY project management skills or specific vendor preferences. WoodAge supports both - the manufacture-coordinate-exclude framework is the same; only the contract structure differs.

Turnkey usually covers modular kitchen, wardrobes, TV/storage units, false ceiling, painting, and lighting, coordinated to one handover. Commonly extra: countertop slab, appliances, loose furniture, civil/plumbing/electrical alteration, and GST. As a 2026 market reference, 2BHK turnkey packages run roughly ₹5-14L and 3BHK ₹12-20L+ (third-party, source: designcafe.com), but the figure only means something against an itemised scope. WoodAge issues a per-line BOQ so inclusions and exclusions are explicit before you commit.

A 2-3 BHK full-home interior typically takes 10-14 weeks from design sign-off to handover (third-party market info, 2026). WoodAge compresses it by manufacturing cabinets at the Gurugram factory in parallel with your on-site civil work - flooring, dado, electrical and gas points proceed while panels are cut, edge-banded and bored. Sequential dependencies (site measurement, GA-drawing approval, countertop slab cutting) set the floor on how short the timeline can be.

A designer sells concept and drawings; a contractor coordinates site labour; a factory-direct manufacturer makes the cabinetry itself. For the modular core (kitchen, wardrobes, storage), buying direct from the factory gives you a per-line BOQ, CNC-custom dimensions and the option to inspect production - and the design and coordination can sit on top. WoodAge manufactures the core at its own Gurugram factory and provides the GA drawing and BOQ, so the most cost-and-quality-sensitive part is not subcontracted.